{"product_id":"powerbox-competition-shv","title":"Powerbox Competition SHV","description":"\u003ch1\u003ePowerbox Competition SHV \u003c\/h1\u003e\n\u003cp\u003e4810\u003c\/p\u003e\n\u003cp\u003eThe Competition SHV is the latest member of the PowerBox product family, and has been developed to take into account the requirements of the latest generation of servos, with their ever-rising power and speed. SHV stands for Super High Voltage, and - as the term indicates - the Competition SHV operates with significantly higher voltages than previous 8.4V systems. The unit can cope with input voltages from 10 to 35V**, which is then passed on to the servos in a redundant arrangement. The advantage is obvious: for a given servo power the current carried by the servo cable is correspondingly reduced. For example, a servo drawing a current of 6A using 8.4V technology will only draw 2A using 25.2V technology and a 6S power supply.\u003cbr\u003eThe lower current drain results in the following scenarios:\u003cbr\u003e\u003cbr\u003eFor a given conductor cross-section, the lower current in the servo cable reduces the voltage drop to the servo. This in turn means more constant servo output power, and the servos operate with consistent torque and speed.\u003cbr\u003eMuch higher servo performance is possible, since currents increase by a lower factor.\u003cbr\u003eFor a given servo output it is permissible to use cable of reduced cross-section. in the case of large models this can result in a significant weight-saving.\u003cbr\u003ePower supply batteries of significantly lower capacity and nominal current can safely be employed.\u003cbr\u003eThe unit is fitted with two redundant DC\/DC converters for the two receivers, gyro, additional telemetry sensors and up to four servos; they generate a regulated voltage of 8.4V and can cope with loads of up to 10A. \u003cbr\u003e\u003cbr\u003eIn terms of software the Competition SHV is based on the proven Competition SR2, and features all the usual PowerBox functions: 12-axis iGyro with optional speed compensation, servo-matching with Auto-Match function, door sequencer, input and output mapping and much more. The whole system can be set up using the high-resolution color screen, or alternatively from the transmitter if you are using PowerBox or Jeti equipment.\u003cbr\u003e\u003cbr\u003eFor the UAV Version, please visit PUAVS.NET. The UAV version operates using modified software: in this variant RX1 serves as “Master”, using channel 16 to switch between inputs RX1 and RX2. This can be used, for example, to switch between a conventional RC system and a Flight Controller. The Flight Controller is also powered by the Competition SHV.\u003c\/p\u003e\n\u003ch6\u003eBox Content\u003c\/h6\u003e\n\u003cp\u003ePowerBox Competition SHV\u003cbr\u003eTFT Display\u003cbr\u003eSensorSwitch\u003cbr\u003e2 patch-leads\u003cbr\u003e4 rubber grommets and brass spacer sleeves\u003cbr\u003e8 retaining screws\u003cbr\u003eOperating instructions in German and English\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eSHV technology: 10 to 35V input voltage - **\u003cem\u003eDOES NOT support systems using below 10v\u003c\/em\u003e\u003cbr\u003e40A max. current load for all SHV servo outputs\u003cbr\u003eregulated 8.4V \/ 10A for receivers, peripherals and four servos\u003cbr\u003e22 channels\u003cbr\u003eoptional UAV version\u003cbr\u003ehigh-performance battery backer with high continuous load capacity\u003cbr\u003e2.4” TFT-screen, legible in sunlight\u003cbr\u003eBi-lingual menu system\u003cbr\u003econsistent duplication of all power electronics\u003cbr\u003eredundant electronic switch\u003cbr\u003eServo matching for all 22 outputs\u003cbr\u003eauto matching function\u003cbr\u003etwo independent door sequencers with Setup Assistant\u003cbr\u003ethe latest integrated iGyro technology, using the iGyroSAT as gyro sensor\u003cbr\u003eTwelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder\u003cbr\u003eindividual gain control for all twelve gyro outputs\u003cbr\u003especial regulatory algorithm for fixed-wing models\u003cbr\u003eSystem detects all transmitter mixers\u003cbr\u003eGraphic menu diagrams ensure ultra-simple programming\u003cbr\u003efast basic setup procedure using the sophisticated Assistant\u003cbr\u003eoptional GPS III for speed-dependent gyro compensation\u003cbr\u003eTelemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum, SRXL2, Multiplex M-Link and Graupner HoTT\u003cbr\u003eTransmission of battery, receiver and GPS* data\u003cbr\u003evirtually all features can be controlled from PowerBox and Jeti transmitters\u003cbr\u003eselectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms\u003cbr\u003eServo feedback current suppression\u003cbr\u003elatest 32-bit micro-processor for precise, high-speed signal processing\u003cbr\u003ehigh-performance machined heat-sink for optimized heat diffusion\u003cbr\u003emachined, anodized aluminum switch and screen case\u003cbr\u003ecompact dimensions\u003c\/p\u003e\n\u003cp\u003eOperating voltage 10,0 V - 35,0 V***\u003cbr\u003ePower supply 3-8s LiPo or Lilon\u003cbr\u003eCurrent drain Power-on state 170 mA by 20V\u003cbr\u003eCurrent drain Standby 40 µA\u003cbr\u003eMaximum load current 2x20A (\u0026lt;30s 2x 40A)\u003cbr\u003eOutput voltage SHV and 8.0V \u003cem\u003e(8V only supplied at JR style outputs)\u003c\/em\u003e\u003cbr\u003eSignal input serial\u003cbr\u003eSupported RC systems PowerBox, Futaba, Jeti, Spektrum, Multiplex, Graup\u003cbr\u003eReceiver redundancy SR2\u003cbr\u003eChannels 26\u003cbr\u003eServo sockets 22\u003cbr\u003eProgrammable servo outputs 22\u003cbr\u003eServo signal resolution 0,5 µs\u003cbr\u003eSignal frame rate 10 ms, 12 ms, 14 ms, 16 ms, 18 ms\u003cbr\u003eGyro regulation Heading- and normal mode\u003cbr\u003eGyro sensor type external iGyro SAT\u003cbr\u003eNumber of sensor axes 12\u003cbr\u003eScreen TFT-Display 320x240 pixels\u003cbr\u003eIntegral door sequencer yes\u003cbr\u003eSupported telemetry systems P²BUS, S.BUS2, EX-BUS, SRXL2, M-Link, Hott, DMSS\u003cbr\u003eDimensions 118 x 71 x 19 mm\u003cbr\u003eWeight 137g\u003cbr\u003eWeight Sensor Switch 15g\u003cbr\u003eWeight of LCD screen 34g\u003cbr\u003eTemperature range -30 °C bis +85 °C\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e---Does not support below 3s LiIon input ***10V MINIMUM--- \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cbr\u003e\u003c\/h6\u003e","brand":"PowerBox-Americas","offers":[{"title":"Default Title","offer_id":52261497700651,"sku":"PH4810","price":590.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/2111\/3131\/files\/4810_01_Hauptbild_01.png?v=1771958980","url":"https:\/\/powerhousehobbies.com\/products\/powerbox-competition-shv","provider":"POWERHOUSE HOBBIES","version":"1.0","type":"link"}